IC693ALG392 90-30系列模拟输出模块

IC693ALG392是一个90-30系列模块。该模块是一个模拟输出模块，通常用于实现仪器或设备的调制控制，例如变频驱动器（VFD）、控制阀、定位器、转换器和其他类似的调制设备。它还可以用于将模拟数据重新传输到接收元件，例如记录器、数据记录器和其他兼容的接收设备。

IC693ALG392具有8个输出通道，分辨率可配置为15或16位，具体取决于所选的模拟输出范围。它能够提供电压信号，如0至+10伏（单极）/ -10至+10伏（双极）电压和0至20毫安/ 4至20毫安输出信号。为了能够产生输出模拟信号，该模块需要一个隔离的24VDC电源，直接连接到模块的指定接线板。

该模块经过工厂校准。校准信息包括0至20 mA的625 A电流；4至20毫安时为0.5安；电压为0.3125mV（每计数）。模块的每个通道显示8毫秒的更新速率，分辨率为0.5 A（1 LSB = 0.5 A），电流为4-20mA；0-20毫安时为0.625安（1 LSB = 0.625安）;0-10VDC输出信号为0.3125mV（1 LSB = 0.3125mV ），-10至+10VDC输出信号为0.3125mV（1 LSB = 0.3125mV）。

该模块适用于RX3i机箱的任何插槽。每个RX3i机架允许的实例数量没有限制。实例的数量取决于特定RX3i控制器支持的模拟数据的数量。

IC693ALG392C

The IC693ALG392 is a Series 90-30 module. This module is an analog output module that is typically used for implementing modulating control of instruments or devices such as Variable Frequency Drives (VFD), Control Valves, Positioners, converters and other similar modulating devices. It may also be used to re-transmit analog data to receiving elements such as recorders, data loggers and other compatible receiving devices.

The IC693ALG392 features Eight (8) output channels with configurable resolution of 15 or 16 bits, depending on the analog output range selected. It is capable of providing voltage signals such as 0 to +10 volts (unipolar) / -10 to +10 volts (bipolar) voltage and 0 to 20 milliamps / 4 to 20 milliamps output signals. In able to generate the output analog signals, this module requires an isolated 24VDC power, directly connected to the designated terminal block of the module.

This module is factory calibrated. Calibration information includes .625 µA for 0 to 20 mA; 0.5 µA for 4 to 20 mA; and .3125 mV for voltage (per count). Each channel of the module exhibits an update rate of Eight (8) milliseconds with resolution of 0.5 µA (1 LSB = 0.5 µA) for 4-20 mA; 0.625 µA (1 LSB = 0.625 µA) for 0-20 mA; 0.3125 mV (1 LSB = 0.3125 mV) for 0-10VDC and 0.3125 mV (1 LSB = 0.3125 mV) for -10 to +10VDC outputs signals.

This module is fitted to any slot of the RX3i chassis. There are no limits to the number of instances allowed per an RX3i rack. The number of instances depend on the number of Analog data a specific RX3i controller supports.