8440-2028 数字I/O扩展板

Each of the inputs can be assigned a name, alarm class, NO/NC configuration and time de-lay. The name and class are displayed on the connected genset controller’s display.

The IKD 1 output relays are controlled over the CAN bus connection from the main genset controller. Configuration of the IKD 1 is performed through the relay manager in the main controller and transmitted to the IKD 1.

A direct configuration cable (DPC) and software can be purchased for use with a PC or laptop and may be advisable for extensive configuration applications or where several similar units are to be set up.

• 8 configurable discrete alarm inputs
• 8 configurable FORM C relays with potential free contacts
• Configurable delays for each input
• CAN bus communication
• The discrete inputs transfer their status via CAN bus to the control unit.
• The control unit evaluates the status of these discrete inputs coming from the IKD 1 and depending on the configuration of the control unit, will take the appropriate action.
• The control unit can send commands via the CAN bus to remotely control the output relays of the IKD 1.
• The IKD 1 can be used with other manufacturer’s controllers. Consult product manual 37135 for information regarding the address assignments of the CAN bus interface.