1756-DMF30 单槽工业control logix模块

1756-DMD 30 Allen-Bradley ControlLogix驱动模块是单槽工业control logix模块，可实现与Reliance Electric分布式电源系统（DPS）设备的设备接口。每个1756-DMD30模块与一个单独的电源模块接口（PMI）机箱连接，并执行外部扭矩、位置和速度控制。1756-DMD30模块与SD3000 6脉冲DPS设备系统（S6 DC驱动和S6R解析器）以及SD3000 12脉冲设备系统（S12 DC驱动和S12R解析器）配合使用。

1756-DMD30模块安装在ControlLogix机箱内，通过光纤网络与SynchLink节点通信。1756-DMD30模块还通过光缆连接到PMI机箱。1756-DMD30模块是单槽模块，采用ControlLogix机箱提供的DC电源运行。在24伏DC时，模块额定电流消耗为3毫安，在5.1伏DC时，为1.35安培。峰值模块功耗为6.96瓦，热耗散为每小时23.7 BTU。模块上提供绿色和红色指示灯，用于诊断、状态和操作更新。存储和操作温度范围分别为-40至185华氏度和32至140华氏度。工作冲击额定值为30 G .推荐的环境相对湿度范围为5%至95%。1756-DMD30模块的平均无故障时间为170万小时。

1756-DMF30

The 1756-DMD30 Allen-Bradley ControlLogix drive module is a single-slot industrial ControlLogix module which enables device interfacing with the Reliance Electric Distributed Power System (DPS) equipment. Each 1756-DMD30 module interfaces with an individual Power Module Interface (PMI) chassis and it performs outer torque, position, and velocity control. The 1756-DMD30 module works with SD3000 6 Pulse DPS equipment system which is an S6 DC drive and an S6R resolver and with the SD3000 12-Pulse equipment system which is a S12 DC drive and S12R resolver.

The 1756-DMD30 module is installed inside a ControlLogix chassis and it communicates to the SynchLink nodes through the fiber optic network. The 1756-DMD30 module also connects to PMI chassis through fiber optic cables. The 1756-DMD30 module is a single-slot module and it operates on DC power that is supplied by the ControlLogix chassis. The module current consumption rating at 24 Volts DC is 3 milliamps and at 5.1 Volts DC, it is 1.35 Amps. The peak module power dissipation is 6.96 Watts and the thermal dissipation is 23.7 BTU per hour. Green and red indicators are provided on the module for diagnostics, status, and operation updates. The storage and operating temperature ranges are -40 to 185 degrees Fahrenheit and 32 to 140 degrees Fahrenheit, respectively. The operating shock rating is 30 G. The recommended ambient relative humidity range is 5 to 95%. The mean time between failure for the 1756-DMD30 module is 1.7 million hours.