IC695RMX128  冗余存储模块 充当反射内存拓扑上的单个节点

产品信息：IC695RMX128  冗余存储模块 充当反射内存拓扑上的单个节点

IC695RMX128

The IC695RMX128 is used in redundancy systems, it cannot be utilized to perform general purpose memory Xchange capabilities. Additionally, a complete communication path must be established to complete the memory Xchange network. A complete communication path consists of a primary RMX unit and a corresponding secondary RMX unit. Two (2) high-speed fiber-optic cables must be connected to the RMX pair and must form a 2-node ring. Since a dedicated RMX module must be used for redundant controller configuration, no other RMX or reflective nide must be used for any redundant controller design. Configuration of RMX node(s) is doe via the programming software, not by jumper or DIP switch settings. This ensure centralized modification of the module and minimizes hardware interruption.

The IC695RMX128 memory module is a redundancy memory module that comes in the RX3i PACSystems series by GE Fanuc Automation. This module is applied specifically where there is a hot standby CPU redundancy system on which a second CPU works as a backup device for the main CPU and there is a constant data transfer between these 2 devices. This module operates on this kind of reflective network and as a link between these 2 CPUs. When this link is inactive or when it is not being used currently, it is identical to the main module, which is the IC695CMX128 module. The GE Fanuc Automation IC695RMX128 redundancy memory module provides data sharing between different PCs and computing devices that are connected through a high-speed fiber-optic network. The module comes with network error detection features.

The GE Fanuc Automation IC695RMX128 redundancy memory module can be connected to other devices through fiber-optic cables in a daisy-chain loop. The transmission is performed from node to node until it reaches the final receiver. This module comes with a reflective memory of 128 KB and a high-speed and easy-to-use 2.12 GBaud fiber-optic network. This module occupies a single slot in the RX3i rack. The GE Fanuc Automation IC695RMX128 redundancy memory change module has a zirconium ceramic ferrule, an insertion loss rating of 0.35 dB maximum, and a return loss. The input power of this module is 580 milliamps at 3.3 Volts DC and it is 220 milliamps at 5 Volts DC. This module can be inserted in an easily and with the power to the system still on. This insertion mode is called jot insertion and applies to certain parts from the RX3i PacSystems series.