IC697CGR935 插槽控制器 允许CPU冗余应用强制进行波动点计算

产品信息：IC697CGR935 插槽控制器 允许CPU冗余应用强制进行波动点计算

IC697CGR935模块是GE Fanuc系列中的一个插槽控制器，它允许CPU冗余应用强制进行波动点计算。冗余系统中的IC697CGR935模块用作控制器。使用IC697CGR935时，有两种控制方法需要注意。在GHS过程中，在每个同步PLC中使用带有一个冗余控制器的几个单总线网络。使用GDB过程时，多个I/O网络与每个同步PLC中的单总线或双总线一起使用。每种控制方法都可以轻松激活和使用。在IC697CGR935模块中，存储器板传送数据，程序存储器包含在模块中。IC697CGR935可远程操作或通过三位运行/停止开关操作。位于模块前面的是led，用于指示CPU的状态。

安装IC97CGR935在未参考适当的可编程控制器安装和热备用CPU冗余手册的情况下，不应尝试使用模块。电池应连接到模块的电池连接器之一。钥匙开关应置于记忆保护关闭位置，并且不应有机架电源。一旦模块安装到机架0的插槽1中，电源就会打开。顶部LED应闪烁，表示IC697CGR935模块已通电。有效完成诊断后，左上角的LED将保持亮起，而第二个和第三个LED将熄灭。第四个LED是记忆保护LED，因为钥匙开关处于关闭位置而关闭。编程现在已经为CPU准备好了。不管钥匙放在哪里，都可以对CPU进行编程。一旦程序被确认，拨动开关可以被定位在适当的操作模式。

技术条件

IC697CGR935

The IC697CGR935 module is a CPU controller module manufactured by GE Fanuc Automation, and it belongs to Series 90-70. It features the 80486DX4 processor, and it is compatible with GE Fanuc Series 90-70 and Series 90-30 systems. This module is usually used in industrial applications and intended to help to process floating-point calculations. When the GE Fanuc IC697CGR935 CPU controller is connected to a personal computer with Windows programming software or the MS-DOS program, this enables easy control of the CPU. The unit operates on 5 Volts of supply voltage, and a current of 3.1 Amps. It comes with a CMOS RAM capacity of 1 MB that is used for processing data and that has battery backup. This unit features 2 communication ports known as Port 1 and 2, and the AS693232SNP cable connects to either of the ports.

The GE Fanuc IC697CGR935 CPU controller comes with LED indicators to give the users quick status updates. The port LED indicators glow green when the cable connects to the corresponding ports. There is also an LED that shows the status of the processor along with the LED indicators on the bottom that show the I/O activity status. In addition to these LED indicators, there is a 3-position switch that corresponds to each of the indicators. In the top position, this switch is used to enable all of the output functions. All of the outputs are disabled when the switch is in the middle position, and when it is in the bottom position, it causes the CPU to exit the “Run” mode. The operating temperature of the IC697CGR935 CPU ranges from 0 to 50 degrees Celsius. If the temperature frequently exceeds 50 degrees Celsius, various forced cooling methods should be applied. This CPU controller module has an RJ 45 port that is used for communication and network connections.