IC698CPE010-AA  RX7i系列中央处理器 实时控制工业机械和材料过程

产品信息：IC698CPE010-AA  RX7i系列中央处理器 实时控制工业机械和材料过程

IC698CPE010是GE Fanuc RX7i系列的中央处理器。该设备能够实时控制工业机械和材料过程。它通过安装在机架上的VME64连接背板与其他设备和模块进行通信。

IC698CPE010有一个300MHz的赛扬微处理器，能够执行浮点计算。每个布尔函数的标准速度是每个线圈0.33毫秒。该设备的其他功能包括但不限于以下内容:三个嵌入式串行端口和两个以太网端口、位字引用支持、符号变量支持、测试编辑模式和网络数据监控。

这个设备有10兆字节的内存用于存储数据和编程信息。这种记忆是由CMOS电池维持的。另外还提供了10兆字节的非易失性闪存(NVRAM)。操作系统固件数据存储在闪存中。无需拆开设备或更换EPROMs即可更新固件。

有两种方法来操作IC698CPE010:三位运行/停止开关，将设备连接到计算机并运行相应的软件。可以通过串行或以太网端口将该设备连接到计算机。注:使用以太网端口需要IP地址和5类电缆。对于串行连接，使用SNP协议。对于该设备的配置和编程，在连接的计算机上使用ProFi cy Machine Edition PLC-Logic Developer软件。配置数据受密码保护。

安装IC698CPE010时，请遵循产品手册中的说明。禁用机架电源。记录设备的媒体访问控制(MAC)地址。将设备牢固地安装并接地到机架的插槽1(指定的CPU插槽)中。连接以太网和串行端口。重新启用机架的电源。将CMOS电池连接到其中一个连接器。开始对器件进行编程。

IC698CPE01

The IC698CPE010 is a Central Processing Unit from the GE Fanuc RX7i series. This device is capable of controlling industrial machinery and material processes in real-time. It communicates with other devices and modules through a VME64 connection backplane mounted to the rack.

The IC698CPE010 has a 300MHz Celeron microprocessor capable of performing floating point calculations. The standard speed of each Boolean function is 0.33ms per coil. Other features of this device include but are not limited to the following: three embedded serial ports and two Ethernet ports, bit-in-word reference support, symbolic variable support, a Test Edit mode, and data monitoring over the web.
This device has 10 megabytes of RAM memory for data and programming information. This memory is sustained by a CMOS battery. An additional 10 megabytes of non-volatile flash memory (NVRAM) is also provided. The operating system firmware data is stored in flash memory. Firmware can be updated without taking apart the device or replacing the EPROMs.

There are two means to operate the IC698CPE010: the three-position run/stop switch and connecting the device to a computer and running the appropriate software. Connecting this device to a computer is possible via the serial or Ethernet ports. Note: Using the Ethernet port will require IP addressing and a Cat5 cable. For serial connections, the SNP protocol is used. For configuration and programming of this device, Proficy Machine Edition PLC-Logic Developer software is used on the attached computer. Configuration data is secured with a password.

Follow the instructions in the product manual while installing the IC698CPE010. Disable rack power. Document the Media Access Control (MAC) address of the device. Securely mount and ground the device into slot one of the rack, the designated CPU slot. Connect the Ethernet and serial ports. Re-enable power to the rack. Connect the CMOS battery to one of the connectors. Begin programming the device.