IS215ACLEH1BC 产品线TC应用控制层板

Product Description

Part No.: IS215ACLEH1BC
Manufacturer: General Electric
Product Type: PRODUCT LINE TC APP CONTROL LAYER BOARD
Series: Mark VI

IS215ACLEH1BC from General Electric is a replacement module. It is used as an Application Control Layer Module in the Mark VI control system (ACL). This was one of GE’s many industrial turbine management systems. The IS215ACLEH1BC is commonly used with Innovation Series controllers.

• Four function LEDs, eight status LEDs, and four ISBus LEDs are located within the two ISBus connectors on the board’s attached front faceplate. It features two COM ports, a single reset switch, and a 10BaseT Ethernet connector. The GE logo and the board’s identification number are both printed on the faceplate. These are located on the top of each screw connector and assist in locking the board into place after it has been installed into a rack.
• The board is equipped with a fourth-generation DX4-100 486 processor. The CPU features an internal L1 cache of 16 KB that runs at 100 MHz. With a core voltage tolerance of 0.3V, the bus rate is 33 MT/s and the bus speed is 33 MHz. The board also includes a PCI controller that controls input and output, memory, and configuration transfers to and from the PCI bus, as well as a 128 KB level 2 cache. A total of 8 MB of 60 Ns EDO non-parity dynamic RAM is available to the PCI controller. On the local bus, there is also a dual-port RAM.
• A PC-compatible interface enables CPU interface logic, keyboard and speaker control, and a real-time clock on the board.