产品详情
| 品牌 | 品名 | 产品型号 | 订货号 |
| NI | 模块 | SCC-AO10 | |
| 产地 | 可售卖地 | 是否进口 | 保修期 |
| 美国 | 全国、国外 | 是 | 一年 |
| 发货地点 | 发货方式 | 使用方式 | 适用行业 |
| 厦门 | 顺丰快递 | 调试安装 | 电厂钢厂水泥厂船舶造纸 |
| 服务优势 | 国外进口 、 备货供应、 | 价格合适、品质可靠 | 图片仅供参考实物为准 |
| 产品特点 | 一手货源、 按型号供货 | 售后有保障 | 何经理1805988-4797 |
SCC-AO10(部件号:777459-50)是美国国家仪器公司的可靠隔离模拟输出模块。该模块提供宽范围的输出电压，最高可达±10伏。该模块允许用户通过E/M系列DAQ设备控制输出电压水平，利用DAQ设备的DAC输出。两个NI SCC-AO10模块可以连接并一起操作，从而实现了操作灵活性和增强的功能。此外，用户可以将输出电压级别提高到±20伏。
美国国家仪器公司SCC-AO10隔离模拟输出模块允许用户完成缩放电压的测量。该模块具有与自己的隔离地进行参考的能力。该模块允许60 VDC的电压水平为模块的共同工作模式，这是在自身和接地通道或机箱接地之间测量的。它还集成了校正增益和偏移误差的功能。此外，建议在开始校准程序之前将DAQ设备预热30分钟。这样可以确保用户在输出端接收到准确的测量电平。
美国国家仪器公司SCC-AO10模块的电流驱动值为±30 mA。在满量程输出范围内，增益的非线性为0.5%。输出噪声的均方根值也很低。典型值为2.5 mV，最大值为4 mV。NI SCC-AO10隔离模拟输出模块还具有有用的短路保护机制，使用户能够在无限持续时间内保护模块的最大电流值(37 mA)。
SCC-AO10
The SCC-AO10 (Part Number: 777459-50) is a reliable Isolated Analog Output Module from National Instruments. This module offers a wide range of output voltage up to ± 10 volts. This module allows the user to control the output voltage level through an E/M Series DAQ device, by utilizing a DAC output of the DAQ device. The two NI SCC-AO10 modules can connect and operate together, which allows for operational flexibility and enhanced capabilities. Additionally, the user can increase the output voltage level up to ± 20 volts.
The National Instruments SCC-AO10 Isolated Analog Output Module permits the user to complete measurements for scaling voltages. The module comes with the capability to be referenced with its own isolated ground. The module allows for the voltage level of 60 VDC for the common mode of operation of the module, which is measured between itself and ground channel or chassis ground. It also incorporates the capabilities to rectify gain and offset errors. In addition, it is recommended to warm up the DAQ device for 30 minutes before starting the calibration procedure. This ensures the user will receive accurate measurement levels at the output.
The National Instruments SCC-AO10 module has a current drive value of ± 30 mA. The nonlinearity of the gain at a full-scale output range is 0.5 %. There are also low RMS values for the output noise. The typical value is 2.5 mV and the maximum value is 4 mV. The NI SCC-AO10 Isolated Analog Output Module also has a helpful short circuit protection mechanism, which enables the user to protect the module for the maximum value of the current (37 mA) for an unlimited duration.
