SRB-MS-ILK5  伺服驱动器是用于工业用途的电气设备和机器的部件

SRB-MS-ILK5

Servo drives are components that are intended to be incorporated into electricalplant and machines for industrial use. When the servo drives are built intomachines or plants, drives cannot be operated until the machine or plant fulfillsthe requirements of the EC Direclive on Machines 89/392/EEC and the ECDirective on EMC (89/336/EEC).EN 60204 and EN 292 must also be observed
In connection with the Low Voltage Directive 73/23/EEC, the harmonizedstandards of the EN 50178 series are applied to the amplifers, together with EN60439-1, EN 60146 and EN 60204.
The manufacturer of the machine or plant is responsible for ensuring that theymeet the limits required by the EMC regulations. Advice on the correctinstallation for EMC -such as shielding, grounding, arrangement of filters,treatment of connectors and the laying out of cabling – can be found within thisdocumentation.
Conformance with the EC Directive on EMC 89/336/EEC and the Low VoltageDirective 73/23/EEC is mandatory for the supply of servo drives within theEuropean Community.
An authorized testing laboratory in a defined configuration with the systemcomponents has tested the servo drives. Any divergence from the configurationand installation described in this documentation means that you are responsiblefor the performance of new measurements to ensure that the regulatoryrequirements are met.
Danaher Motion Kollmorgen’s SERVOSTAR S Series drives and systems havebeen successfully tested and evaluated to the limits and requirements of the EODirective on EMC (89/336/EEC) and the EC Directive on Low Voltage172/73/EEC). The product lines have been evaluated to EN50178 and EN60204as a component of a machine and other relevant standards.
The EMC of a system can be identified by emissions and immunity. Emissionsrefer to the generation of EMl (electromagnetic interference) and immunity refersto the susceptibility levels of the equipment. Limits were derived from genericstandards EN55081-2 and N55082-2 for heavy industrial environments. TheSERVOSTARS series of drives have been tested for radiated emissions,conducted emissions, EFT, ESD, surge, conducted immunity, and radiatedimmunity. These tests have been done in accordance with EN55011,EN61000-4-2,ENV50140,IEC 1000-4-4,EN61000-4-5,and ENV50141.